This listing is for It's Me Hi I'm the Problem UV DTF Motel Keychain Transfer for a Motel Keychain (no keychain will be sent, just the transfer) The transfer is sized to fit 1.8 x 3.5 inch Keychains.
No heat is required for application, the UV DTF is waterproof & permanent and printed with high quality inks.
APPLICATION INSTRUCTIONS:
1. Peel design transfer off of the backing.
2. Place the transfer onto the keychain, making sure it is placed exactly where you want it to go. The adhesive on the transfer is strong, once the transfer touches the keychain it is very difficult to take off without damaging the image.
3. Press the transfer down with your fingers, working from the centre outwards. Make sure you really secure the image down, more pressing the better!
5. Peel the carrier clear film off and that's it!
Please hand wash only. It's not advised for any item with the transfer on to be put in the dishwasher or microwave as the image will become damaged due to the pressure.
Be careful when applying your transfer as Wild Transfers is not responsible for application mishaps.
***Please Read: Not all brands of Motel Keychains have the same measurements and can differ by a couple of millimetres. These transfers have been sized to fit 1.8 x 3.5 inch Motel Keychains. You may need to cut or adjust the design if needed***
